Fast Hardener WP160

Water Proofing

The water proof fast hardener powder is a fast hardener material based on cement used to block high-pressure leakages following getting mixed with a powerful paste.

Description

The water proof fast hardener powder is a fast hardener material based on cement used to block high-pressure leakages following getting mixed with a powerful paste.

Method and indication

Mix fast hardener powder with water (30 percent of the powder mixture weight), so that a homogenous and uniform paste will be obtained; wait 30 seconds following mixing. Afterwards, press the prepared paste on the leakage place for 20 to 30 seconds.

Level the paste with concrete or stone following perfectly fill the hole and leakage. Use a narrow drainage pipe where there is a high pressure. Afterwards block the leakages around it. Finally, remove or cut the pipe and seal the resting location using above-mentioned method.

Note: Always apply the required fast hardener powder for mixing with water which can be used in less than 30 seconds.

Applications

• Sealing seams and water channels and stone and concrete sections
• Fast repair and seal the lifts holes, pipes and channel
• Immediate stoppage of any water leakage

Effects and attributes

• Applicable when contacting with drinking water
• Possibility of fast commissioning
• Without contraction and crack
• Without Chlor Ion
• Fast efficiency

Additional information

Physical state

powder

Color

Gray

Ion chlorine

Does not have

Special Weight

2.15 g / cm³

Shelf Life

One year in initial package

Storage conditions

Not to be exposed to frost and cold weather, heat and direct sunlight

The best storage temperature

10 to 30 degrees Celsius

Packing

25 kg bag

There are no reviews yet.

Be the first to review “Fast Hardener WP160”

Your email address will not be published.